The DHS Program User Forum: IPUMS Demographic and Health Surveys (IPUMS-DHS)

Home » Data » IPUMS Demographic and Health Surveys (IPUMS-DHS) » Weights and Strata for Pooled Samples

Show: Today's Messages :: Show Polls :: Message Navigator

Weights and Strata for Pooled Samples [message #19761]

Mon, 10 August 2020 12:27

Yawo
Messages: 45
Registered: February 2019

Member

Hello,

I've used IPUMS to create a combined dataset for men and women for 23 African countries.

As the listing below shows, the weights are not constant within each PSU as they should be. In fact we have two different weights within each PSU, one for males and one for females.

 list sample sex weight weight2 psupool stratapool in 115431/115435

        +----------------------------------------------------------------+
        |       sample      sex    weight   weight2   psupool   strata~l |
        |----------------------------------------------------------------|
115431. | Lesotho 2014     male   .515554         1      4753        336 |
115432. | Lesotho 2014   female    .48581         1      4753        350 |
115433. | Lesotho 2014   female    .48581         1      4753        350 |
115434. | Lesotho 2014     male   .515554         1      4753        336 |
115435. | Lesotho 2014   female    .48581         1      4753        350 |
        |----------------------------------------------------------------|

This issue has been the source of "weights not constant within PSU" error I have been receiving when running svy: melogit models.

However, I thought I can adjust the strata and the psu by taking gender into account. Doing so results in constant weights within each psu, as the code and listing below shows.

egen psupool= group(idhspsu sex)
egen stratapool= group(strata sex)


list sample sex idhspid idhspsu idhsstrata psupool stratapool weight in 10/15

     +----------------------------------------------------------------------------------------------------------+
     |      sample      sex                   idhspid      idhspsu   idhsstrata   psupool   strata~l     weight |
     |----------------------------------------------------------------------------------------------------------|
 10. | Angola 2015     male       2401    00010001  3   2401000001   2401000018         1        321    .979475 |
 11. | Angola 2015     male       2401    00010012  3   2401000001   2401000018         1        321    .979475 |
 12. | Angola 2015     male       2401    00010026  1   2401000001   2401000018         1        321    .979475 |
 13. | Angola 2015   female       2401    00010001 02   2401000001    240100018         2         18   1.001989 |
 14. | Angola 2015   female       2401    00010002 03   2401000001    240100018         2         18   1.001989 |
     |----------------------------------------------------------------------------------------------------------|
 15. | Angola 2015   female       2401    00010002 02   2401000001    240100018         2         18   1.001989 |
     +----------------------------------------------------------------------------------------------------------

My question:

1. Is this necessary to adjust the strata, psu and even the weights when we append male and female data into one file.

2. And if so, is my <egen> code the right way to readjust the strata. If not, is there any other way?

3. I was able to run my melogit models successfully after applying the adjustment to the strata and the psu, but again, I want to be sure the adjustment is ok, else I would have to revert to running separate models for men and women.

thanks - cY

Report message to a moderator

Re: Weights and Strata for Pooled Samples [message #19762 is a reply to message #19761]

Mon, 10 August 2020 14:57

Trevor-DHS
Messages: 803
Registered: January 2013

Senior Member

Unfortunately you can't just merge the datasets together without adjusting the sample weights. The sample weights are relative weights and are normalized separately to the total number of women and total number of men in the sample. For example for Lesotho DHS 2014, 6621 women were interviewed, but only 2931 men (and that includes men age 15-59, not just 15-49). In Appendix A, it states that "In addition, in a subsample of households (every second household), all men age 15-59 who were usual residents of the households or stayed in the households on the night before the interview were eligible for interview". If you used the merged data without adjusting the weights you would be assuming that there were more than twice as many women in Lesotho than men!

Typically this adjustment is made by applying a constant factor to the weights for women and the weights for men. These constant factors are taken by using estimates of the male and female population age 15-49 in Lesotho from some external source, such as the UN's World Population Prospects or from census data, and dividing by the total sample size for women and for men age 15-49 from the survey.

This same issue applies when you pool data from multiple surveys or multiple countries, each of which have their own weights that will need adjusting.

As for the code adjusting the PSU and stata, I don't know melogit, but I cannot think of another solution if you need to include both women and men in the same model. Can you run separate models for women and for men? Otherwise I don't have a better option.

Report message to a moderator

Re: Weights and Strata for Pooled Samples [message #19763 is a reply to message #19762]

Tue, 11 August 2020 08:08

Yawo
Messages: 45
Registered: February 2019

Member

Thanks so much, Trevor.

I think the best solution is to run separate models. I would be interested in knowing more about how these constant factors are applied. I have seen some studies using pooled DHS where male/females are combined. I will contact those authors to see how they handled the issue (just for curiosity sake). But I will separate the datasets by gender, and run separate models for each.

Thanks for a long and torturous detour !.

With much appreciation - cY

Report message to a moderator

Re: Weights and Strata for Pooled Samples [message #19780 is a reply to message #19763]

Fri, 14 August 2020 07:53

Yawo
Messages: 45
Registered: February 2019

Member

Trevor: thanks so much, so would this be the correct svyset specification?

svyset psupool, strata(stratapool) weight(weight2) vce(linearized) singleunit(missing) || _n, weight(weight)


Note: Stage 1 is sampled with replacement; further stages will be ignored for variance estimation.

      pweight: <none>
          VCE: linearized
  Single unit: missing
     Strata 1: stratapool
         SU 1: psupool
        FPC 1: <zero>
     Weight 1: weight2
     Strata 2: <one>
         SU 2: <observations>
        FPC 2: <zero>
     Weight 2: weight

Thanks so much - cY

Report message to a moderator

Re: Weights and Strata for Pooled Samples [message #19792 is a reply to message #19780]

Fri, 14 August 2020 11:58

Trevor-DHS
Messages: 803
Registered: January 2013

Senior Member

This looks fine. A couple of notes:
1) vce(linearized) is the default, I believe, so you don't actually need to specify it.
2) singleunit - most people use singleunit(centered). Singleunit(missing) will result in missing values for the standard errors, whereas singleunit(centered) specifies that strata with one sampling unit are centered at the grand mean instead of the stratum mean. This doesn't usually matter as it is unusual to have only one sampling unit in a stratum, but in case there is such as case, using singleunit(centered) will give you an estimate.

Report message to a moderator

Re: Weights and Strata for Pooled Samples [message #19816 is a reply to message #19761]

Mon, 17 August 2020 17:08

Yawo
Messages: 45
Registered: February 2019

Member

Thanks so much - changes made. Model runs well.

Gracias - cY

Report message to a moderator

Previous Topic:	Next IPUMS-DHS Release
Next Topic:	Melogit and Weights

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 12:18:36 Coordinated Universal Time 2024